Foam-cored wetroom deck , linear drain & tanking kit
The lowest cost option to create a wetroom with a linear channel drain. The wetroom deck former is constructed from a high crush strength, ridged foam, laminated on both sides with a reinforced polymer cement coating.
These decks can be laid directly on to existing floors or at joist level when fully supported by under-boarding.
- Foam-cored wetroom floor former deck with cut out for linear drain - click on the options for size details
- Drain/trap with grid options - see below for grid and outlet options
- 8kg Tanking compound (covers 10m2) and primer
- 10m Joint tape, 2 x corner reinforcements & 2 x pipe collars
Underlay Wetroom Deck
DIY Wetroom only supplies the highest grade foam-cored decks with a compressive loading of 30 tonnes per square meter giving the confidence to use 25mm mosaic tiles without the danger of them sinking. These decks provide the perfect fall to the drain in a solid sheet with no weak joints.
With a solid floor or under-boarding the deck provides the perfect, stable surface for tiling over with large or small ceramic tiles. (Other kit options available for vinyl coverings)
Tanking for Piece of Mind - Guaranteed
The DIY Wetroom tanking compound and joint reinforcement completes the most reliable wetroom system available. When installed to the detailed instructions, the DIY wetroom kit has a "life of tiling" guarantee.
High Flow, Easy Fit Drain
The patented NOOD (no-odour) trap ensures no bad smells even if the trap runs dry. It gives a flow rate of up to 72 litres per minute (105mm models) and is BBA approved. The design makes the linear drain easy to assemble after the deck is fitted. The outlet options cater for all design possibilities.
Choose either a shallow horizontal outlet (36 lpm, just 52mm below the deck) or the deeper side, end or vertical options
The standard grid option is a stainless steel tray that can be tiled over or you can choose to upgrade to one of the stylish patterned grids.