Foam cored wetroom deck, square drain & tanking kit, wetroom in a box
With one of these kits comes the opportunity to make a quality reliable wetroom at the lowest cost. The wetroom deck former is constructed from a high crush strength, ridged foam, laminated on both sides with a reinforced polymer cement coating.
These decks can be laid directly on to existing floors or at joist level when fully supported by under-boarding.
- Foam-cored wetroom floor former deck complete with pre-fixed drain plate - click on the options for size details
- Drain/trap with optional designer grids - see below for grid and outlet options
- 8kg Tanking compound (covers 10m2) and primer
- 10m Joint tape, 2 x corner reinforcements & 2 x pipe collars
Underlay Wetroom Deck
DIY Wetroom only supplies the highest grade foam-cored decks with a compressive loading of 30 tonnes per square meter giving the confidence to use 25mm mosaic tiles without the danger of them sinking. These decks provide the perfect fall to the drain in a solid sheet with no weak joints.
With a solid floor or under-boarding the deck provides the perfect, stable surface for tiling over with large or small ceramic tiles. (Other kit options available for vinyl coverings)
Tanking for Piece of Mind - Guaranteed
The DIY Wetroom tanking compound and joint reinforcement completes the most reliable wetroom system available. When installed to the detailed instructions, the DIY wetroom kit has a "life of tiling" guarantee.
High Flow, Easy Fit Drain
The drain is fully approved for wetrooms and gives "fit and forget" performance with a flow rate of 32 litres per minute. The two part design allows fitting to the waste pipe (50mm or 40mm) prior to the deck installation then the top part screws in and seals to the square drain plate pre-fitted to the deck.
Choose either a horizontal outlet (just 86.5mm below the deck) or the vertical outlet option.
Optional Designer Grid Choice
Upgrade from a standard grid to a polished stainless steel designer grid.